🌈4-in-1 Remote Control Duplicator

Are you worried about losing your remote control keys and paying the manufacture a large fee to replace it?

BENEFITS

• This gadget transfers signals to duplicate your existing remote controls so you always have a duplicate remote or key available in case you lose the original
• The device can clone up to 4 remote buttons from the same or different remotes allowing you carry four remotes in one! Each corresponding letter (A, B, C, & D) can each open a different remote controlled key
• You can open your garage door and unlock your car by using one remote control instead of carrying two keys with you
• The seamless infrared connection is secured and safe to use through data encryption

MULTIPURPOSE

FEATURES

• Easy to copy and done within minutes
• Portable keychain design
• High frequency

SPECIFICATIONS

• Working frequency: 433

• Control distance: 5-20 meters

• Rated voltage: 12 (V)

• Rated current: 10 (mA)

• Weight: 19g

• Color: Black

• Size: 

PACKAGE

• 1/3/5/10 * 4-in-1 Remote Control Duplicator

The product is compatible with the following chips: 2260 (all manufacturers), 2262 (all manufacturers), PT2264, SMC5326 (all manufacturers), SC5262, HT12E, HT12D, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918, SM5028S series, 527 (all manufacturers), 1527 (all manufacturers), 2240 (all manufacturers) (some non-standard codes from abroad and some rolling codes from both domestic and international sources are also compatible).

PACKAGE

• 1/3/5/10 * 4-in-1 Remote Control Duplicator
• User manual

HOW TO USE (very easy)

1. Clear code: Press and hold the On and Off buttons at the same time, and release them when you see the indicator light flashing to indicate successful code clearing (if it does not flash, release them and press them again).
2. Copy: Put two remote controls together, press and hold the door opening button at the same time, and when you see the indicator light flashing, then going out and then coming on, the copy is successful. Use the same method to learn the remaining buttons (if they are not copied, try changing the positions of the two remote controls to find the signal).
3. Restore: When you accidentally clear the copy of the remote control code, you can simultaneously press the copy of the remote control of the bottom two keys, LED lights will flash quickly, let go after pressing any key. When the light is long, this Indicates that the code for the remote control is restored. Before using our copy remote control, please be sure to remove the existing code from the remote control.
4. How to deal with the situation where some of the keys can control, the rest cannot control? You can use clear and restore operation, the specific operation is as follows:
1. first clear code;
2. after clearing code, copy the unsuccessful key again, and there is no need to copy the rest buttons;
3. and then clear the code again;
4. restore code; at this time, the original keys that were not successfully copied are now covered by new codes, and the original keys that were successfully copied are now retained. If there is no copy after the second copy of the keys, repeat the above steps again and again until all keys are successfully copied.

（battery not included）