HOT PRODUCT | LOW STOCK
🛠️ 9-Piece Steel Tube Marking Guide Set 📐 45° & Straight-Line Marking 🔧 For Square & Rectangular Tubing ✨
🛠️ 9-Piece Steel Tube Marking Guide Set 📐 45° & Straight-Line Marking 🔧 For Square & Rectangular Tubing ✨
BUNDLE & SAVE
Couldn't load pickup availability
- American express payment method
- Apple pay payment method
- Bancontact payment method
- Blik payment method
- Diners club payment method
- Discover payment method
- Eps payment method
- Google pay payment method
- Jcb payment method
- Maestro payment method
- Master payment method
- Mb payment method
- Mobilepay payment method
- Paypal payment method
- Przelewy24 payment method
- Shopify pay payment method
- Twint payment method
- Unionpay payment method
- Visa payment method
-
Ordered
- - -
Order Ready
- - -
Delivered
🛠️ 9-Piece Steel Tube Marking Guide Set 📐 45° & Straight-Line Marking 🔧 For Square & Rectangular Tubing ✨
Fit. Align. Mark.
Get To Work. 🛠️
Still measuring and rechecking every angle on your square tubing? Make your marking workflow more straightforward with this 9-piece tube guide set. Choose the matching guide, position it on your tubing and trace along the edge to create 45-degree or straight marking references.
One Set. Multiple Tube Sizes.
Not every fabrication project uses the same tubing dimensions. This set includes nine individual size-specific guides for working with different square and rectangular steel tube profiles. Select the guide that matches your tube instead of repeatedly adjusting a general-purpose measuring tool.
📐 Square Tubing
Choose the matching guide for compatible square profiles.
▰ Rectangular Tubing
Select a corresponding guide for compatible rectangular profiles.
🔢 Size Identification
Check the size marking on each guide before use.
45° Layout. Made More Straightforward.
Need an angled reference line for a miter-style tube project? Position the 45-degree guide on the matching tubing and trace along its angled edge. Create a clear marking reference before moving on to the cutting process.
Mark One. Repeat The Same Setup.
When you're preparing multiple pieces of matching tubing, repeated measuring can slow down your workflow. Keep the matching guide on hand, position it at the required marking point and repeat the same guide-based process across compatible pieces. A more consistent approach to repeated fabrication layouts.
🔁 Reusable Guide
Reuse the same size guide for matching tubing profiles.
📏 Consistent Positioning
Follow the same reference edge for repeated marking tasks.
⏱️ Less Repeated Measuring
Simplify repeated guide placement instead of resetting your measuring tools each time.
Choose The Matching Guide. Then Trace.
The right fit starts with the right size. Compare your tubing dimensions with the marking on the guide, position the tool on the tube and check that it sits correctly before tracing. A simple sequence that helps keep your layout process organized.
01 Measure
Check the outside dimensions of your square or rectangular tube.
02 Match
Select the corresponding size-specific guide.
03 Align
Position the guide correctly on the tubing.
04 Mark
Trace the appropriate guide edge with a suitable marker.
Straight-Line Marking Without The Guesswork.
Not every job requires an angled cut. For straight-line layouts, use the guide's straight edge as a reference. Position the matching guide and trace along the edge to create a clear marking line on the tubing surface.
One Set For Different Tube Layout Jobs.
📐 45° Miter Preparation
Create angled reference lines for square and rectangular tubing projects.
📏 Straight Layouts
Use the straight edge for straightforward marking tasks.
🔁 Repeated Fabrication
Reuse a matching guide across multiple pieces of the same profile.
🏗️ Metal Frame Projects
Useful for preparing compatible square and rectangular tube layouts.
🔧 Workshop DIY
Keep a range of matching guide sizes ready for different tube projects.
🛠️ Welding Preparation
Organize marking references before moving to the cutting and assembly stages.
Measure. Match. Mark. Then Make Your Cut.
01 Check Tube Size
Measure the actual tube dimensions before selecting a guide.
02 Choose The Guide
Find the corresponding size marking on the tool.
03 Trace The Edge
Mark the 45° or straight reference line using a suitable pen.
04 Remove Before Cutting
Take the guide off the tube before beginning the cutting operation.
Small Guides. A More Organized Workflow.
🧩 9-Piece Collection
Multiple individual guides for different compatible tubing dimensions.
📐 45° Marking
Angled guide edge helps create miter reference lines.
📏 Straight-Line Marking
Straight edge provides a convenient marking reference.
🔢 Size Markings
Identify the guide that corresponds to your tube profile.
🔁 Reusable Design
Reuse matching guides for repeated marking work.
🛠️ Versatile Layout Tool
Designed for square and rectangular steel tubing.
The Details At A Glance.
Get The Fit Right Before You Trace.
Good marking starts with matching the guide to the actual tubing. A little preparation helps create more consistent reference lines.
Measure the actual outside dimensions of your square or rectangular tubing.
Match the size marking on the guide with the tube profile.
Make sure the guide sits correctly before drawing the marking line.
Use a suitable marking pen or pencil with a clear visible line.
Remove the guide before cutting. It is a marking accessory, not a cutting tool.
Wear suitable eye and hand protection when performing subsequent cutting and fabrication work.
A Few Questions Before Your Next Project.
How many guides are included?
The product is listed as a 9-piece set containing nine individual size-specific marking guides.
What type of tubing is it designed for?
It is designed for square and rectangular steel tubing. It is not advertised as a universal guide for round pipes.
Can I use it for 45-degree marking?
Yes. The angled guide edge provides a 45-degree reference for marking miter-style layouts on compatible tubing.
Can it also make straight marking lines?
Yes. The straight-edge marking design provides a reference edge for straight-line layouts.
How do I choose the correct guide?
Measure your tubing's actual outside dimensions and compare them with the size markings on the individual guides.
Can I reuse the same guide for multiple tubes?
Yes. The guide can be reused for matching tubing profiles. Position it consistently each time to help maintain a repeatable layout.
Does the set cut the steel tube?
No. This is a marking guide set. It helps create reference lines. Remove the guide before using a separate cutting tool.
Is a marking pen included?
The product listing does not confirm that a marking pen is included. Use a suitable marking pen or pencil for your tubing surface.
What material are the guides made from?
The exact material composition is not specified in the available product listing.
Can I use these guides for different tube profiles?
The set contains multiple size-specific guides for different square and rectangular tubing profiles. Always match the guide to the actual dimensions of your tube.
Fit. Align. Mark. Get The Job Moving. 🛠️
Nine individual guides. 45-degree and straight-edge marking. Multiple square and rectangular tubing profiles. Keep your marking process organized and spend less time repeating the same measuring steps. A practical addition to your metalworking toolkit.
FAQ
FAQ
1. When will my order ship?
Most orders are processed within 1–3 business days.
2. How long is delivery?
Standard U.S. delivery usually takes 5–12 business days. International orders may take longer.
3. How do I track my order?
Once your order ships, you will receive an email with a tracking number.
4. Can I change or cancel my order?
Orders can only be changed or canceled before they are shipped. Contact us as soon as possible if you need assistance.
5. What payment methods do you accept?
We accept major credit/debit cards, PayPal, Shop Pay, Apple Pay, and other secure checkout options (depending on availability).
6. What if the item arrived damaged?
Please email us with a photo of the damaged item within 48 hours, and we will arrange a replacement or refund.
7. What if the package is lost?
If your package is marked “delivered” but you didn’t receive it, contact us and we will help investigate with the carrier.
8. Do you ship internationally?
Yes, we ship to most countries. Shipping times vary based on destination.
